360 Excavator (above 10 tonnes) Plant Test
Please contact us for details of price and availability
3.75 hour test.
Who its for
This is a plant test that is suitable for those who have sufficient knowledge and practical experience to be able to pass the theory and practical element for CPCS Trained Operator Card. Training is available based on ability.
Knowledge & skills you will be assessed on (theory / practical)
Understand current Health & Safety legislation including: lifting operations, lifting equipment regulations and lifting signals to BS7121
Carrying out pre-start and running checks on machine
Learn to set the excavator for site travel
Travel over differing types of terrain, including undulating ground and slope
Manoeuvre in confined areas using forward & reverse direction
Set the excavator for relevant duties
Produce a vertical trench to the specified dimensions
Complete a square excavation with vertical sides at the end of the dug trench
Load material into a vehicle
Remove the bucket and replace with an alternative
Lift the load from minimum radius, position the load at 75% of full radius and rotate for a minimum of 180 degrees. On completion land the load at a given point and detach.
Reinstate the work area back to the original state
Shutdown and secure procedure.
Explain loading and unloading procedures on and off a transporter
Prerequisites
Proof of passing the Health and Safety Touch Screen Test (passed within the last 2 years)
Photographic ID (CSCS Card, Driving Licence, UK Passport, CPCS Card)
National Insurance number
Course Length
3.75 hours – 1 hour Theory and 2.75 hours practical